Javascript required
Skip to content Skip to sidebar Skip to footer
Home / Crestron How to Upload Config File Mc3

Crestron How to Upload Config File Mc3

Viewport control

Clarification

Toolbox procedure

Ship Programme (Alt+P)

Uploads the compiled SIMPL plan to the command organization.

From any tool:

  • Printing Alt+P (if not assigned to another function during Quick Function Setup).

-or-

  1. Click the Quick admission function push button .

  2. Click SIMPL Program (if not removed during Quick Function Setup).

From the Organization Info tool:

  1. Click the Functions menu.

  2. Click SIMPL Program.

From the Network Device Tree:

  1. Right-click the top-level Network Devices item and select Show Network View.

  2. Correct-click the control arrangement and point to Functions.

  3. Click SIMPL Plan.

Send Touchpanel (Alt+T)

Uploads the compiled VTPro-eastward projection to the touch screen.

From anywhere in the Toolbox (if connected to the panel):

  • Printing Alt+T (if non assigned to another function during Quick Function Setup).

-or-

  1. Click the Quick access function button .

  2. Click Project (if not removed during Quick Function Setup).

From the System Info tool (if continued to the panel):

  1. Click the Functions card.

  2. Click Project.

From the Network Device Tree (if connected to the control system):

  1. Right-click the network ID of the panel.

  2. Point to Functions.

  3. Click Project.

Ship Web Pages

Uploads Web pages to the control system'due south internal Web server.

From the Organization Info tool:

  1. Click the Functions card.

  2. Click Web Pages.

From the Network Device Tree:

  1. Right-click the top-level Network Devices detail and select Show Network View.

  2. Right-click the control system and point to Functions.

  3. Click Web Pages .

Send Touchpanel (MT-500C merely)

Uploads the compiled touch screen project to the MT-500C.

From anywhere in the Toolbox (requires direct connection to the MT-500C):

  • Printing Alt+T (if not assigned to some other function during Quick Function Setup).

-or-

  1. Click the Quick access function button .

  2. Click Projection (if not removed during Quick Office Setup).

From the System Info tool:

  1. Click the Functions menu.

  2. Click Project.

Additional

The upload procedure requires a direct connectedness to the MT-500C. To add the MT-500C to the Address Book:

  1. Click the Device Type list.

  2. Click OK when the warning is displayed.

  3. Select MT-500C as the Device Type.

This volition automatically fill in the serial settings. Yous can then use a serial cable to connect the MT-500C straight to the PC.

Send Pages to ML-500

Uploads the compiled project to the ML-500.

From anywhere in the Toolbox (requires direct connection to the ML-500):

  • Press Alt+T (if not assigned to another function during Quick Function Setup).

-or-

  1. Click the Quick access office push .

  2. Click Project (if not removed during Quick Function Setup).

From the System Info tool:

  1. Click the Functions menu.

  2. Click Project.

Additional

The upload procedure requires a directly connectedness to the ML-500. To add the ML-500 to the Address Book:

  1. Click the Device Type list.

  2. Click OK when the alarm is displayed.

  3. Select ML-500 every bit the Device Blazon.

This will automatically fill in the serial settings. You tin then use a serial cable to connect the ML-500 directly to the PC.

Transport Pages to MT-1000C

Uploads the compiled project to the MT-1000C.

From anywhere in the Toolbox (requires direct connectedness to the MT-1000C):

  • Printing Alt+T (if not assigned to some other function during Quick Role Setup).

-or-

  1. Click the Quick access function button .

  2. Click Project (if not removed during Quick Function Setup).

From the Arrangement Info tool:

  1. Click the Functions menu.

  2. Click Project.

Additional

The upload procedure requires a direct connection to the MT-1000C. To add the MT-1000C to the Address Volume:

  1. Click the Device Blazon list.

  2. Click OK when the warning is displayed.

  3. Select MT-1000C equally the Device Blazon.

This volition automatically fill up in the serial settings. You tin can then use a serial cable to connect the MT-1000C direct to the PC.

Ship Network Device Sound/Data File

Uploads sound and data files to touch screens and other network devices.

Follow the procedures described for "Send Touchpanel".

Transport File to Mailbox

Sends a file to the \Mailbox directory.

From the File Manager:

  1. Open the \Mailbox directory under Internal Flash.

  2. Using Windows Explorer, locate the files to be transferred. (Typically this is the .smw source file.)

  3. With both Windows Explorer and the File Managing director tool open, drag and drop the file from the hard drive to the command system'due south \Mailbox directory.

Get File from Mailbox

Retrieves a file from the \Mailbox directory.

From the File Director:

  1. Open the \Mailbox directory nether Internal Flash.

  2. Right-click the file and select Send Files To.

  3. Locate the target directory and click OK.

Load NVRAM from File

Sends a file to program NVRAM.

From the System Info tool:

  1. Click the Functions button.

  2. Click Program NVRAM.

  3. Click the Scan button next to Restore and locate the file to be transferred.

  4. Click Ship.

From the Network Device Tree:

  1. Correct-click the top-level Network Devices particular and select Show Network View.

  2. Right-click the command arrangement and point to Functions.

  3. Click Program NVRAM.

  4. Click the Browse button next to Restore and locate the file to be transferred.

  5. Click Ship.

Save NVRAM to File

Save the contents of program NVRAM to a file.

From the System Info tool:

  1. Click the Functions button.

  2. Click Program NVRAM.

  3. Click the Browse button next to Retrieve and locate the target directory.

  4. Click Retrieve.

From the Network Device Tree:

  1. Right-click the acme-level Network Devices item and select Show Network View.

  2. Right-click the control arrangement and indicate to Functions.

  3. Click Program NVRAM.

  4. Click the Browse push button next to Retrieve and locate the target directory.

  5. Click Retrieve.

Update Control System (Alt+O)

Uploads the operating system (.cuz file) to the control organisation.

From the System Info tool:

  • Printing Alt+O (if non assigned to another function during Quick Function Setup).

-or-

  1. Click the Functions card.

  2. Click Firmware.

From the Network Device Tree:

  1. Right-click the top-level Network Devices detail and select Bear witness Network View.

  2. Right-click the control system and indicate to Functions.

  3. Select Firmware.

Update Touchpanel/Keypad Firmware

Uploads firmware to a touch screen or keypad.

From the System Info tool (when connected to the device):

  • Press Alt+O (if non assigned to another role during Quick Office Setup).

-or-

  1. Click the Functions card.

  2. Click Firmware.

From the Network Device Tree (when connected to the control arrangement):

  1. Right-click the network ID of the interface.

  2. Point to Functions.

  3. Select Firmware.

Update Network Device Firmware

Uploads firmware to network devices.

Follow the procedures described for "Update Touchpanel/Keypad Firmware".

Update WPR-48 Firmware

Uploads firmware to the WPR-48.

From the System Info tool (requires direct connection to the WPR-48):

  • Press Alt+O (if not assigned to some other part during Quick Role Setup).

-or-

  1. Click the Functions menu.

  2. Click Firmware.

Boosted

The upload procedure requires a direct connexion to the WPR-48. To add the WPR-48 to the Accost Book:

  1. Click the Device Type list.

  2. Click OK when the alarm is displayed.

  3. Select WPR-48 as the Device Blazon.

This will automatically fill in the serial settings. Y'all can then use a series cablevision to connect the WPR-48 directly to the PC.

Update TPMC-10 Firmware

Uploads firmware to the TPMC-10.

Follow the procedures described for "Update Touchpanel/Keypad Firmware".

Load Network Device (Legacy)

Uploads firmware to discontinued devices.

Follow the procedures described for "Update Touchpanel/Keypad Firmware".

Update Sub-Slot Device Firmware

Uploads firmware to sub-slot devices, e.g., the C2N-TAMWX.

From the Network Device Tree (when connected to the control organisation):

  1. Right-click the top-level Network Devices particular and select Bear witness Network View.

  2. Expand the sub-slot where the device is located.

  3. Correct-click the sub-slot ID and point to Functions.

  4. Select Firmware.

From anywhere in the toolbox (when connected to the device):

  • Follow the procedures described for "Update Command System."

Additional

To add a sub-slot device to the Address Book:

  1. Select the Indirect connection type.

  2. Click Slot Number.

  3. Select the slot number of the Cresnet device that contains the sub-slot device.

    For example, for a C2N-TAMWX sub-slot device, select the slot number of the C2N-TFM.

  4. Select the Cresnet device from the Through list.

The Cresnet device should itself be addressed every bit an indirect connectedness, "through" the control organisation.

Update Plug-In Card

Uploads firmware to installed cards.

From the Network Device Tree:

  1. Right-click the network accost of the plug-in control carte.

  2. Select Update Firmware.

Retrieve Programme (2-Series merely)

Retrieves the compiled SIMPL program (.spz file) from the control system.

From anywhere in the Toolbox:

  1. Press Alt+P (if not assigned to another role during Quick Function Setup).

  2. Click Retrieve.

-or-

  1. Click the Quick admission office push .

  2. Click SIMPL Program (if not removed during Quick Function Setup).

  3. Click Remember.

From the System Info tool:

  1. Click the Functions menu.

  2. Click SIMPL Program.

  3. Click Call up.

From the Network Device Tree:

  1. Right-click the top-level Network Devices item and select Prove Network View.

  2. Right-click the command organization and bespeak to Functions.

  3. Select SIMPL Plan.

  4. Click Retrieve.

Full general File Transfer

Provides options for sending and receiving files using ASCII, XModem  or XModem1K file transfer protocols.

From the Text Console:

  1. Click the Communications bill of fare.

  2. Select the desired file transfer protocol. (The XModem commands motorcar-detects both 1K and 128-byte packets.)

Document Management

Provides options for obtaining and uploading SSL certificates.

From the System Info tool:

  1. Click the Functions card.

  2. Click SSL Management.

From the Network Device Tree:

  1. Right-click the control system and bespeak to Functions.

  2. Select SSL Direction.

Send SIMPL+ Program to the CEN-OEM

Uploads a SIMPL+ programme to the CEN-OEM serial-to-Ethernet controller and Spider web server.

The CEN-OEM is an X-Generation device not supported by Toolbox.

brentnallrofeend.blogspot.com

Source: https://help.crestron.com/toolbox/Content/Viewport_to_Toolbox/File_Transfer_Menu.htm